CronusMax – Full Crossover

Requires a USB 2.0 Hub that is connected to the INPUT port on the CronusMax

• A Dual Shock 4 (DS4) controller connects to one port on the hub and the Quadstick connects to another. If U/A continues to flash on the CronusMax display, reverse the order of the ports.

• Enable PS4 Partial Crossover must be OFF In CronusPro.

• Allows running Gamepacks in the CronusMax

• Turn on PS4 from the front panel, not the DS4.

The Quadstick must not change the USB emulation mode after power up when used in Full Crossover. USB modes 0 or 4 can be used with the CronusMax. If using the default USB mode 0, the PS4 Crossover Essentials Gamepack is required to access the touchpad.

The Dual Shock 4 controller must be properly configured and prepared before use.