Input Jack with Two Switches
The Inputs jack on the back of the Quadstick or a Singleton is a 3.5 mm stereo connector with the two input circuits (Tip & Ring) and Shield (or Ground).
Two switches may be connected using the following circuit.
|
Input Name
|
Description
|
Delay
|
|
digital_in_1
|
Input Jack - Tip to Shield (SW1)
|
instant
|
|
digital_in_2
|
Input Jack - Ring to Shield (SW2)
|
instant
|
Table 2: External Digital Inputs 1 & 2
When using two Switches in this manner, the Quadstick can detect the switch closures independently and simultaneously.
Most assistive switches use 3.5mm mono connectors. An adapter that splits the two circuits on the stereo connector is required if using more than one switch. The Hosa YMM-261 3.5 mm TRS to Dual 3.5 mm TSF Stereo Breakout Cable is a suitable adapter.
The digital inputs can be used in the configuration spreadsheet just like a sip/puff input:
