PS5

 
Sony has implemented onerous licensing and security features with the PS5 that prevent easily adapting the Quadstick to it.
 
As of January 24th, with an update to the PS5 operating system, the Cronus Zen and Besavior U5 direct connect methods have stopped working for PS5 games.  Those two methods are indicated below with strike through text.  Hopefully this is a temporary situation.
 
The table below summarizes the methods that can be used:
 
 

Direct USB connection methods for playing PS5 games on the PS5 console:

 

Besavior by Beloader

 
The Besavior is a modified Playstation Dual Sense controller that will work with the Quadstick running USB emulation modes 3 & 7 (XBox 360 & Dualshock 4).  The power requirements of the Quadstick will quickly drain the battery of a Besavior, so an external power supply will be required, which connects into the side of the QTG cable that is supplied with the Besavior.  The chief drawback of the Besavior is the touchpad position cannot be controlled by the Quadstick, only pressed in the center.  The touchpad on the Besavior itself is fully functional.
 
 

Besavior U5 by Beloader

 
The Besavior U5 is a USB adapter that connects between the Quadstick and the PS5.  A Dual Sense controller also connects to the U5 to provide authentication.  An external power supply may be required. 
 
 
 

Cronus Zen in PS5 mode

 
The Cronus Zen is a USB adapter that connects between the Quadstick and the PS5.  A Dual Sense controller also connects to port A1 on the side and the Quadstick connects to port A3.
 
 

Playstation Remote Play (PSRP) plus QMP

 
The advantage of using the PS Remote Play on Windows is that no other hardware is required.  The Quadstick, plus the newest version of the Quadstick Manager Program, QMP 4, will work with PS Remote Play (versions < 6.0), allowing PS5 games to be played.  Since we are only interested in the controller-to-console function of PS Remote Play, once the system has started for the best video quality, the video output of the console can be directly displayed.
 
The Quadstick Manager Program (QMP) versions 4+ can make use of a virtual DualShock 4 emulator program named ViGEmBus.  Prior to the release of version 6 of the PSRP, this allowed the Quadstick to be used by PS4/PS5 consoles with full motion and touchpad functions.  With the release of PSRP Version 6, ViGEmBus stopped working.  There are two basic work-arounds without resorting to using a hardware adapter:  Install an earlier version of PSRP and patch it to prevent it from updating or use an open source alternative called Chiaki.  
 
Installing PSRP version 5.5:
 
  • Uninstall newer version of PS Remote Play, if previously installed.
  • Download and install the previous release that worked with QMP 4+:  PS Remote Play version 5.5.0.08250.  When first running the installer, ignore when it asks for the exe and dependencies.  When first running PSRP after installation, do not follow the prompts to update PSRP to a newer version.
  • If you do not want the continually reenter the PS remote play PIN codes, with PSRP closed, download, un-zip, and run the Remote Play version patcher:  Xeropresence patcher
  • If in the future, whenever PSRP requests you to download a new version of PSRP, simply re-run the patcher and it will update the version number of the installed PSRP.
  • Download and install QMP 4+ from the Quadstick Downloads page.
  • Select both QMP and ViGEmBus installation when running the installer.  HIDHide is not required for PSRP. 
  • On the Misc tab of QMP, Select "Enable virtual Dualshock 4 emulation" and "Enable boot is PS4 USB mode".  Save preferences to Quadstick.
     

    Chiaki

     
    Chiaki is an open source alternative to Playstation Remote Play.  It will also work with QMP 4+ and ViGEmBus.  There are numerous versions of Chiaki produced by different developers.  A version that supports full touchpad and motion controls can be found here
    Un-zip the file and simply run Chiaki.exe and follow the on-screen instructions.  It works with QMP 4+, as described above for PSRP or with the Quadstick running in USB emulation mode 7.  Since it is not formally installed, once it is running, pin to the task bar to make it easy to re-launch.
     
    Chiaki needs your Playstation account ID number.  To obtain this number, follow either this link or this link and follow the instructions to get your ID.  Next obtain the PIN code from the PS5's Remote Play settings, and enter both numbers into the Chiaki program.
     
    More information about Chiaki can be here, here and here.
 

Playstation Remote Play (PSRP) with Cronus Zen

 
Playstation Remote Play runs on PCs, Mac, iOS and Android devices.  Instructions for using the Cronus Zen with PS Remote Play can be found here:  https://guide.cronus.support/sony-remote-play
 

Original Beloader and Beloader Pro

 
The Beloader setup has the advantage of not requiring a PC while playing but it is difficult to set up.
 
The Quadstick needs to be in emulation mode 3 or 7.  Boot in PS4 USB mode doesn't work with it.   3 is XBox 360 and 7 is Dualshock 4.  7 is what the Quadstick switches to when it detects a PS4 console but it cannot detect the Beloader and must be explicitly told.
 
Here's the Beloader tutorial video:  https://youtu.be/88rNyBVnsCs
 
You will need to modify your config files with a Preferences sheet to run in mode 7 if you want touchpad.  Also, turn on "Titan two PS4 flag", or set the preference "titan_two" to 1 in a game file, to prevent the Quadstick from resetting the connection every 7 minutes.
 
DO NOT MAKE THAT YOUR DEFAULT.CSV OR PUT IT IN PREFS.CSV.  Emulation mode 7 has no flash drive access for making changes to the Quadstick.

Titan Two and CronusMax Zen direct connection method for PS4 games

 
The most up to date list with the status for which games can be played and which ones cannot be played is maintained by CronusMax Zen and Titan Two direct connections are here.
 
The Console Tuner Titan Two and the CronusMax Zen direct connection methods require the use of a PS4 Specialty controller for "Authentication", or a special dongal for the CM Zen.  The DualSense controller that comes with the PS5 will NOT work for authenticating 3rd party crossover controllers like the Quadstick.
 
The CronusMax Zen direct connection instructions can be found here:  https://beta.cronusmax.com/ps5
 
The Titan Two instructions are currently incomplete on their website.  The Output Protocol must be set to Automatic (not PS5).
 
The firmware for both devices is frequently updated, so any newly purchased device will need to be updated prior to use.
 
See the Console Tuner Forum for the latest information on support for the PS5.
 
The Quadstick is set up just like for the PS4, with both the "Boot in PS4 USB mode" and "Titan Two PS4 flag" enabled in the Misc tab of QMP.  The Quadstick should be running a recent firmware build, like 2328 or later.
 
 
Specialty controllers that can be used for Authentication of Cronus Zen or Titan Two:
 
Astro C40 TR
Mad Catz Street Fighter V Arcade FightStick TE2+
Nacon Compact Wired Controller
Nacon Revolution Pro v1
Nacon Revolution Pro v2
Nacon Revolution Pro v3
Nacon Revolution Unlimited Pro
Razer Raiju Tournament Edition
Razer Raiju Ultimate
Scuf Vantage
Scuf Vantage 2